Contents 1 Important Risk of swallowing coin battery 2 Your Docking Speaker Introduction What's in the box Overview of the main unit Overview of the remote control 3 Get started Prepare the remote control Connect power Turn on 4 Play Play from iPod/iPhone Play from an external device Adjust volume...
1 Important • Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
Risk of swallowing coin battery • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion.
2 Your Docking Overview of the main unit Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this docking speaker, you can • enjoy audio from the iPod/iPhone, and other external audio devices; and • ...
Overview of the remote control • Select iPod/iPhone dock mode. • Skip to a track. • Search within play. • Adjust volume. • Mute or restore volume. • Start or pause play. • Select MP3 link mode.
3 Get started Connect the AC power adaptor to: • the power socket at the back of the docking speaker. • the wall socket. Always follow the instructions in this chapter in sequence. Prepare the remote control For first-time use: Remove the protective tab to activate the remote control battery.
Turn on Press to turn the docking speaker on. » The LED indicators light up. Switch to standby mode The docking speaker switches to standby mode in following situations: • Press again; • The speaker is idle for 15 minutes when powered by AC supply.
3G • iPhone Listen to the iPod/iPhone Philips DockStudio app brings a suite of new features to your docking speaker, including Internet radio and a multi-function alarm clock. To enjoy more features, you are recommended Launch the app after the installation.
Page 10
Follow the on-screen instructions to Note complete the firmware update. • With the DockStudio app, you can enjoy music, set clock and alarm, adjust sound settings, and update firmware if necessary. • To pause or resume play, press • To skip to a track, press • ...
Charge the iPod/iPhone Play from an external device Note With this docking speaker, you can also enjoy audio from an external device such as an MP3 • If the docking speaker is operated on the batteries, you player. cannot charge your iPod/iPhone. When the docking speaker is connected to Note AC power, the docked iPod/iPhone begins to...
Adjust volume To adjust volume: • Press +/- on the remote control; • Press +/- on your docking speaker; or • Adjust the volume control of your iPod/iPhone or external device. • If the docking speaker is powered by batteries, the volume is lower than that by AC supply. Mute sound During play, press to mute or restore sound.
5 Specifications General information Power supply Amplifier - AC Power Model: AS190-090- AE190 (Philips); Input: 100-240 V ~, Rated Output Power 2 X 6 W RMS 50/60Hz, 0.7A; Signal to Noise Ratio >62 dBA Output: 9 V 1.9 A Total Harmonic...
If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power •...
All unnecessary packaging has been omitted. device that are not expressly approved by We have tried to make the packaging easy to Philips Consumer Lifestyle may void the user’s separate into three materials: cardboard (box), authority to operate the equipment. polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)