Installation Of Device Drivers - Intel PT-6IBD User Manual

440BX
MAINBOARD

3.6 INSTALLATION OF DEVICE DRIVERS

There is a CD which comes with the mainboard. The CD contains the device
drivers which is necessary when installing the mainboard. Please refer to the
following procedures to install the device drivers.
A. Install the IDE driver:
(You don't have to install this driver if you are installing Windows
98. This driver is designed for Windows 95 and Windows NT only)
Step 1. Insert the CD into the CD ROM drive.
Step 2. Change the directory to "\Driver\mainboard\Intel\IDE Driver "
Step 3. See "README.TXT" and choose the OS to install the device driver.
B. Install PCI Bridge:
(You don't have to install this driver if you are installing Windows
98. This driver is designed for Windows 95 only)
Step 1. Insert the CD into the CD ROM drive.
Step 2. Change the directory to "\Driver\mainboard\Intel\Utility "
Step 3. Run " WINP2X4.EXE" and follow the screen instruction to complete
the installation.
C. Install the Hardware Monitoring Program: (optional)
The hardware monitoring is optional on the mainboard. When you
found the Winbond W83783S is installed on U17, you may use the
following procedure to install the hardware monitoring program and
it will monitor your system healthy status.
Step 1. Insert the CD into the CD ROM drive.
Step 2. Select directory "\Driver\mainboard\Hardware Monitoring\W83783S"
Step 3. Run "SETUP.EXE" to install the hardware monitoring program.
HARDWARE SETUP
3-23