Intel PT-6IBD User Manual page 45

440BX
MAINBOARD
Auto Detect DIMM/PCI Clk: ( default setting : "Enable" )
When "Enabled" is selected, the mainboard will detect the presence of devices on
DIMM and PCI slots. When there is no device presented, the clock on the related
DIMM and PCI slot will be disabled to reduce the electro magnetic interference
(EMI).
Spread Spectrum: ( default setting : "Disable" )
When you select "Enabled", the special feature designed in the system chipset
will be triggered and reduce the EMI as mentioned above.
CPU Warning Temperature : ( Optional )
The "Hardware Doctor™" – Winbond W83781D or W83783S is optional on the
mainboard. When they are installed on the mainboard, you may use this field ( and
the fields below ) to monitor the healthy status of your PC system. These selection
fields can not be seen on this screen unless you have the Winbond W83781D
installed on the board and you have enable the "Throttle Duty Cycle" in the
"Power Management Setup" ( please see section 4.7 )
There is a CD comes with the mainboard and you will find the hardware doctor
program in the CD. When you have installed the hardware doctor, it will keep
monitoring the CPU temperature, Cooling fan speed, system voltage ... etc.
Whenever it detects the abnormal condition occurs, it will give you the warning
message or slow down the CPU to avoid system damage.
The following events appears only when the hardware monitoring is installed
****************************************************************
CPU Warning Temperature : ( Valid when W83781D is installed )
The hardware monitoring device – Winbond W83781D/W83783S is optional on
the mainboard. When they are installed on the mainboard, you may use this field (
and the fields below ) to monitor the healthy status of your PC system. These
selection fields can not be seen unless you have the W83781D/W83783S
installed on the board and you have enable the "Throttle Duty Cycle" in the
"Power Management Setup" (see section 4.7 )
There is a CD comes with the mainboard. You will find the hardware monitoring
program in the CD. When you have the hardware monitoring software installed in
your PC system, it will let you have a bodyguard in your PC system and it will
keep monitoring the CPU temperature, Cooling fan speed, system voltage ... etc.
Whenever it detects the abnormal condition occurs, it will give you the warning
message or slow down the CPU to avoid serious damage to the PC system.
AWARD BIOS SETUP
4-10