Installing The Printer Driver - Kyocera ECOSYS P2035d Operation Manual

Connecting and Printing

Installing the Printer Driver

Ensure the printer is plugged in and connected to the PC before installing the
printer driver from the DVD-ROM. The printer driver is necessary to print
data created in an application.
For details on the printer driver, refer to Printer Driver User Guide on the
DVD-ROM.
Note Installation on Windows must be done by a user logged on
with administrator privileges.
When connected by USB cable, Plug and Play is disabled on this
device when in Sleep mode. To continue the installation, press the
GO key to wake the device from Low Power Mode or Sleep before
continuing.
Installing Printer Driver in Windows
Express Install
The following procedure is an example for installing the software in Windows
7 using Express Install.
For details, refer to Custom Installation in the Custom Install on page 3-5.
1
Insert the DVD-ROM.
Note Installation on Windows must be done by a user logged
on with administrator privileges.
If the Welcome to the Found New Hardware Wizard dialog
box displays, select Cancel.
If the autorun screen is displayed, click Run setup.exe.
If the user account management window appears, click Yes
(Allow).
2
Click View License Agreement and read the License Agreement.
Click Accept.
3
Select Express Install tab.
Note To install Status Monitor, it is necessary to install
Microsoft .NET Framework 4.0 beforehand.
3-3