Table of Contents
Advertisement
Standby mode
ON/OFF button
Standby mode
► Press the ON/OFF button to switch the Standby mode on and off.
Windows XP:
You can configure the ON/OFF button under Start –(Settings) - Control Panel -
Performance and Maintenance - Power Options - Advanced.
Windows Vista:
You can configure the ON/OFF switch under Start symbol - (Settings) - Control
Panel - Mobile PC - Power Options - Advanced.
In the Standby/Suspend-to-DRAM mode the content of your main memory is saved by continuing
to supply the main memory with power, while the processor, monitor, hard disk and other internal
components are switched off. This mode is activated whenever you press the ON/OFF button.
Saving is also triggered when you do not make an entry on your notebook for a certain time. When
you resume work, your notebook returns to the place at which you discontinued working.
Windows XP:
You can set the power-management features for your notebook under Start – (Settings)
- Control Panel - Performance and Maintenance - Power Options.
Windows Vista:
You can set the power-management features for your notebook under Start -
(Settings) - Control Panel - Mobile PC - Power Options.
If you are using an integrated LAN/Modem, a PC-LAN card or a PC
modem card, please be aware that switching over to Standby mode can
lead to an interruption in the network connection.
Your notebook will switch off if you press the ON/OFF button for more than 4 seconds.
Additional information on this service programme is contained in
your operating system help files.
A26391-K200-Z226-1-7619, edition 2
Energy saving functions
51
Advertisement
Table of Contents
