ACCESSORIES
18
To maintain product SAFETY and RELIABILITY, repairs, any
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
CAUTION:
•
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
•
Steel & Carbide-tipped saw blades
Crosscutting
Fine cross cuts
Non-ferrous met-
als miter saw
blades
•
Vise assembly (Horizontal vise)
•
Socket wrench 13
•
Holder set
•
Holder set (with set plate)
•
Holder rod assembly
•
Set plate
•
Dust bag
•
Triangular rule
•
Lock-off button (2 pcs.)
For smoother cross grain cuts. Slices cleanly
against the grain.
For sand-free cuts cleanly against the grain.
For miters in aluminum, copper, brass, tubing,
and other non-ferrous metals.