Usb Cable - Panasonic SC-BTT560 Operating Instructions Manual

iPod/iPhone Connection
Connect the iPod/iPhone to either of the USB port
or the Dock ([BTT560] and [BTT500] only).
≥ [BTT560] [BTT500] Only underlined iPod/iPhone
on page 27 can be connected to the Dock.
Preparation
≥ Turn the main unit off or reduce the volume of
the main unit to its minimum.
Connecting with a dedicated

USB cable

1
Connect the iPod/iPhone.
To purchase a dedicated USB cable, consult
your iPod/iPhone dealer.
e.g.,
Dedicated USB cable
[BTT560] [BTT500]
Connecting to the Dock
1
Push the centre of drawer (A), and pull
out fully until it clicks to open the dock.

28
VQT4Q16
iPod/iPhone (not supplied)
(not supplied)
2
Connect the iPod/iPhone firmly.
≥ Check that the connector (B) has no dust
or foreign materials before connecting.
≥ To connect the iPod/iPhone firmly, remove it
from the case, etc. before inserting.
≥ Insert the iPod/iPhone along the backrest
(C) with the iPod/iPhone display facing out.
≥ Carefully insert and remove the iPod/iPhone
to ensure long lasting product enjoyment.
iPod/iPhone
(not supplied)


iPod/iPhone Playback
1
Press [HOME].
2
Select "iPod" and press [OK].
3
Select the item to play.
≥ Repeat this procedure if necessary.
Album artwork
iPod
≥ If album artwork is not contained in the
data, " " will appear on TV.
≥ Depending on the software version of your
iPod/iPhone, the album artwork may not
appear properly.
≥ Some operations may not work while
reading the album artwork.
≥ The setting of the playback mode will be kept until changes
are made on the same iPod/iPhone.
≥ Surround sound effect and sound mode are available.
Good morning
Ronaldo
Happy days
1:00
-2:30
45 of 1230