Table of Contents
Advertisement
OnChip IDE Function
Please refer to section 3-7-1
OnChip Device Function
Please refer to section 3-7-2
OnChip SIO Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or on-chip VGA first. The
settings are: PCI Slot, AGP Slot, On-Chip VGA.
3-7-1
OnChip IDE Function
OnChip IDE Channel 0
OnChip IDE Channel 1
Primary Master
Primary Slave
Secondary Master PIO
Secondary Slave PIO
Primary Master
Primary Slave
Secondary Master UDMA
Secondary Slave UDMA
IDE DMA Transfer Access
IDE Prefetch Mode
IDE HDD Block Mode
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
OnChip IDE Channel 0/Channel 1
The integrated peripheral controller contains an IDE interface with support for two IDE
channels. Select Enabled to activate each channel separately. The settings are: Enabled
and Disabled.
Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of
the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines the
best mode for each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE Function
Enabled
Enabled
PIO
Auto
PIO
Auto
Auto
Auto
UDMA
Auto
UDMA
Auto
Auto
Auto
Enabled
Enabled
Enabled
Menu Level >>
30
Item Help
Advertisement
Table of Contents
