Controller Functions - Lionel LL Bean Ready-To-Run O-27 Set Owner's Manual

Controller operations

Controller functions

A s you turn the throttle control knob to
the right, power to the track is
increased. When the indicator reaches the
green band, there should be sufficient power
to operate the locomotive. The further into
the green area the knob is turned, the faster
your train will go. Remember that the
greater the load on the engine (adding
Press this button to produce
a realistic whistle sound in
your tender.
Slight reduction in speed
Note!
during whistle operation
is normal
Press this button to go forward or
reverse, or to place the locomotive in
"neutral" (no movement, headlight is on).
Turn the throttle control
knob to the right for more
power.
more cars for the engine to pull, for exam-
ple), the farther into the green band the
knob must be turned before it will operate
the locomotive.
The yellow band indicates the average
power range that the train will be operating
in. The red band represents maximum
power output.
R
OFF OFF FULL FULL
SPEED SPEED
6
The LED indicator shows
when your controller is
On.
Green band
Yellow band
Red band
OFF