Shutdown Instructions - Mr. Heater Portable Buddy MH9BX User Manual And Product Specifications

Step 4
• After pilot lights, hold down for 30-60
seconds and then release knob. Knob
should return to fully extended position.
• To operate heater, slightly depress Control
Knob and gently turn to lock in the "HI".
position to light burner tile. Leave on "HI"
position until burner tile turns bright orange.
• After burner tile has turned bright orange,
adjust heat output by turning Control Knob
to desired position ("LO" or "HI" setting).

Warning:
Do not operate Heater UnLeSS ControL KnoB IS LoCKeD In a poSItIon
marKeD "HI", "Lo" or "pILot".
neVer Set ControL KnoB BetWeen LoCKeD poSItIonS. poor ComBUStIon anD
HIGHer LeVeLS oF CarBon monoXIDe maY reSULt.
Shut Down Instructions
• To shut off heater, slightly push down and
turn Control Knob clockwise to
"OFF" position.
• CaUtIon: After turning heater off, wire
guard will remain hot. Allow to thoroughly
cool before storing.
• Do not operate, store or remove cylinder
near flammable items or ignition sources.
• LP-GAS CYLINDERS MUST BE
DISCONNECTED FROM HEATER WHEN
NOT IN USE!
¥
¥
¥