Honda 2005 Accord 4dr Owner's Manual page 231

Main Menu Main Menu Table of Contents
Lights
5. To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
6. Install the new bulb and turn it
clockwise to lock it in place.
7. Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
8. Test the new bulb to make sure it
works.
9. Put the inner fender cover in place.
Install and lock each holding clip
by pushing on the center.
230
Replacing Rear Bulbs
(in Fenders)
BULBS
COVER
1. Open the trunk.
2. Remove the light assembly cover
by pulling its outside edge.
3. Remove the socket by turning it
one-quarter turn counterclockwise,
and pull the bulb straight out of its
socket.
4. Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
5. Test the new bulb to make sure it
works.
6. Reinstall the light assembly cover.
SOCKETS