Honda 2005 Accord 4dr Owner's Manual page 230

Main Menu Main Menu Table of Contents
6. Install the new bulb and turn it
one-quarter turn clockwise to lock
it in place.
7. Push the electrical connector onto
the bulb.
8. Turn on the headlights to test the
new bulb.
9. Put the inner fender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
the center.
Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
HOLDING CLIPS
1. To change the passenger's side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver's side bulb, turn
the steering wheel to the right.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
3. Pull the inner fender cover away
from the fender and bumper.
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Lights
BULB
CONTINUED
229