Emergency Calls; Certification Information (Sar); This Device Meets International Guidelines For Exposure To Radio Waves - Nokia 9300 User Manual

A d d i t i o n a l s a f e t y i n f o r m a t i o n

Emergency calls

Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline
networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed.
You should never rely solely on any wireless device for essential communications like medical emergencies.
To make an emergency call:
1. If the device is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the device.
2. Press as many times as needed to clear the display and ready the device for calls.
3. Key in the official emergency number for your present location. Emergency numbers vary by location.
4. Press the key.
If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult
this guide or your service provider for more information. When making an emergency call, give all the necessary information
as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not
end the call until given permission to do so.

Certification information (SAR)

THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure
to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The guidelines were developed by independent
scientific organisations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial
safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit stated in the international guidelines is 2.0 W/kg*. Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR of the device while operating can be well below the
maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a base station, the lower the power output of the device.
The highest SAR value for this device when tested for use at the ear is 0.24 W/kg.
This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at
least 1.5 cm away from the body. When a carry case, belt clip or holder is used for body-worn operation, it should not
contain metal and should position the product at least 1.5 cm away from your body.
In order to transmit data files or messages, this device requires a quality connection to the network. In some cases,
transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation
distance instructions are followed until the transmission is completed.
* The SAR limit for mobile devices used by the public is 2.0 watts/kilogram (W/kg) averaged over ten grams of body tissue.
The guidelines incorporate a substantial margin of safety to give additional protection for the public and to account for any
variations in measurements. SAR values may vary depending on national reporting requirements and the network band. For
SAR information in other regions please look under product information at www.nokia.com.
Copyright © 2004 Nokia. All Rights Reserved. 96