Sending Options For A Text Message; Replying To Text Messages; Text Message Settings - Nokia 9300 User Manual

M e s s a g i n g
Press Write message, select
To write a new text message, press
numbers in the To: field. If you enter more than one number, separate the numbers with a semicolon or by pressing the
Enter key after each number. Write the message, and press Send. You can see the number of characters that are left in the
character counter. Note that a text message can only contain unformatted text.
To set the sending time or modify other delivery settings, press
Tip: All text messages are stored in the Outbox until they are sent. Unless the text message is sent immediately,
you can open the Outbox and suspend or resume the sending of the message.
To print the text message, press Menu, and select

Sending options for a text message

To set sending options for the current text message, press
dialog page to another, press the Menu key.
On the Sending options page, define the following:
• Service centre in use — Select the message center to deliver the message.
• Delivery report — Select whether to view the status of the sent text message in Log.
• Send text message — Select when to send the text message. If you select
Outbox, and press Send
sent.
To set sending options for all text messages, press Menu in the main view of Messaging, and select
settings.... Select Text message, and press Edit.
To set sending options for the current text message, press
dialog page to another, press the Menu key.
On the Advanced page, define the following:
• Validity period — Select how long the message center stores a text message if a recipient cannot be reached.
the maximum value allowed by the message center. Note that the network must support this feature.
• Reply via same centre — Select whether the reply to your message should be sent using the same message center number
your message used.
• Message conversion — Select whether to convert the text message into a fax, e-mail, or paging. Change this option only if
you are sure that the message center can convert text messages into these other formats. Contact your network operator
for more information.
• Concatenation — Select
messages that are longer than 160 characters as several messages, and allow them to be received as one long message by
compatible devices. Sending a message over 160 characters may be more expensive than one message.
To set sending options for all text messages, press Menu, and select
press Edit.

Replying to text messages

To respond to received text messages, open the message, and press Reply.
To call the sender of the text message, press
Tip: If the text message that you received contains a hyperlink, select the hyperlink, and press
open the browser. If the text message that you received contains a number, place the cursor on the number, and
press Call number

Text message settings

To define general sending options for text messages, press Menu, and select
and press Edit. To move from one dialog page to another, press the Menu key.
On the General page, define the following:
• Service centre in use — Select the message center to deliver the messages.
• Delivery report — Select whether to view the status of the sent text messages in Log.
• Send text message — Select when to send the text messages. If you select
Outbox and press Send
• Validity period — Select how long the message center stores messages if a recipient cannot be reached. Note that the
network must support this feature.
On the Concatenation page, define the following:
Copyright © 2004 Nokia. All Rights Reserved.
Text message, and press OK.
Recipient to select the recipients of the message, or enter the recipients' GSM phone
File
to send it. If you select Scheduled, you must define the date and time when the message will be
No to send text messages longer than 160 characters as several messages. Select
Call sender.
to call the number.
to send it.
Sending options.
→ → Print....
Printing
Sending options in the text message editor. To move from one
Upon
Sending options in the text message editor. To move from one
→
Tools Account
Tools
Upon
31
request, you must select the message in
→
Tools
settings.... Select Text
Open Web address
→
Account settings.... Select
request, you must select a message in
Account
Maximum is
Yes to send text
message, and
to
Text message,