Cleaning The Cylinder Area; Replacing The Suction Head - Makita DCS4600S Instruction Manual

14
B
15
C
26

Cleaning the cylinder area

STOP
Remove cover.
Remove the fan housing.
CAUTION: To prevent eye injury, always wear eye protec-
tion when cleaning the filter with compressed air!
The entire area (14) can now be brushed clean or cleaned
with compressed air.
A bottle brush can come in handy for cleaning out the cylinder
ribs.

Replacing the suction head

The felt filter (15) of the suction head can become clogged. It
is recommended to replace the suction head once every
three months in order to ensure unimpeded fuel flow to the
carburetor.
To remove the suction head for replacement, pull it out through
the tank filler neck using a piece of wire bent at one end to
form a hook.