Components; Door Closure Mechanisms; Freezer Drawer/Fresh Food Door Handles - GE Profile PGCS1RKZ Technical Service Manual

Freezer Drawer/Fresh Food Door Handles

Note: Each freezer drawer handle is held in place by
a left and a right 1/8-in. Allen set screw. Each fresh
food door handle is held in place by a top and a
bottom 3/32-in. Allen set screw. When tightened, the
set screws lock the handle to mounting fasteners
located behind the handle and attached to the
drawer or door panel.
Using an Allen wrench, loosen the 2 recessed
screws, and then pull the handle straight out from
the drawer or door panel.
Note: If the handle mounting fasteners need to be
tightened or removed, use a 3/16-in. Allen wrench.
Mounting
Fastener
A
A
1/8-in. Allen Wrench
3/16-in. Allen Wrench
3/32-in. Allen Wrench
Mounting Fastener

Components

3/16-in. Allen Wrench
– 22 –

Door Closure Mechanisms

Fresh Food Doors
The closure mechanism for each fresh food door
consists of a hinge closure assembly attached to
the top of the cabinet that interacts with a cam
attached to the top of each door.
To access the hinge closure assembly, it is
necessary to remove the Phillips-head screw
and the cover from the top of the hinge closure
assembly.
The hinge closure assembly is held to the top of the
cabinet with two 5/16-in. hex-head screws. The cam
is attached to the top of the door with two T-20 Torx
screws.
T-20 Torx Screw
T-20 Torx Screw
Cover
5/16-in. Hex-head Screws
(Continued next page)