Page 1
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 1 INSTRUCTION MANUAL Cataloge Numbers CDC14K2-XE,CDC18K2-XE CDC14GK2-XE,CDC18GK2-XE & & HANK CHOOSING LACK ECKER HANK CHOOSING LACK ECKER BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-654-155 1-800-654-155 BEFORE YOU CALL, HAVE THE CATALOG No. AND DATE CODE AVAILABLE. IN MOST CASES, A BLACK &...
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 2 General Safety Rules WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 3 The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 4 • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber (CCA). Your risk from these exposures varies, depending on how often you do this type of work.
Page 5
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 5...
Page 6
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 6 SAFETY WARNINGS AND INSTRUCTIONS: CHARGING 1. This manual contains important safety and operating instructions. 2. Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack. CAUTION: To reduce the risk of injury, charge only Black &...
Page 7
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 7 CHARGING THE BATTERY PACK FIGURE B THE BATTERY PACK IS NOT FULLY CHARGED AT THE FACTORY. BEFORE ATTEMPTING TO CHARGE THE BATTERY PACK, THOROUGHLY READ ALL OF THE SAFETY INSTRUCTIONS. The charger is designed to use standard household 230 volt 50 Hz power. 1.
Page 8
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 8 OPERATING INSTRUCTIONS TRIGGER SWITCH & REVERSING BUTTON (FIGURE E) • The drill is turned ON and OFF by pulling and releasing the trigger switch (1). The farther the trigger is depressed, the higher the speed of the drill. •...
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 9 MAINTENANCE Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 10 SERVICE INFORMATION All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.
Page 11
90504485 CDC9602,CDC1200 etc 6/19/06 10:39 AM Page 11 Black&Decker (Australia) PTY.LTD. Black&Decker New Zealand 20 Fletcher Road 5 Te Apunga Place Mooroolbark 3138 MT WELLINGTON NEW ZEALAND Tel: 64 9 259 1111 Victoria Australia Tel: (61 3)8720 5100 Fax: 64 9 259 1122 Fax:(61 3)9727 5940 Service Department: Tel: 1800-654-155...