Table of Contents
Advertisement
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
INSTRUCTION MANUAL
CD961 & CD121
9,6V & 12V
Taladros Inalámbricos de 3/8" (10mm)
Parafusadeira á Bateria de 3/8" (10mm)
3/8" (10mm) Cordless Drills
Advertencia: Léase este instructivo antes de usar el producto!
Advertência: Leia este manual de instruções antes de utilizar o produto!
Warning: Please read this manual, before using the tool!
Advertisement
Table of Contents
Related Manuals for Black & Decker CD121
Summarization of Contents
General Safety Rules
Work Area Safety
Keep work area clean, avoid explosive atmospheres, and keep bystanders away.
Electrical Safety Guidelines
Handle cords with care, use specified chargers, and use designated battery packs.
Personal Safety Precautions
Stay alert, dress properly, avoid accidental starting, and use safety equipment.
Service and Maintenance
Professional Servicing
Tool service must be performed by qualified repair personnel using identical replacement parts.
Specific Safety Rules
Handling Tool Near Wiring
Hold tool by insulated surfaces to prevent shock from hidden wiring or internal components.
Charging the Drill
Charging Instructions and Warnings
Read instructions, use specified chargers, avoid rain/snow, and use correct extension cords.
Charging the Power Pack
Power Pack Charging Procedure
Charge for 5 hours with switch in OFF position, using the specified charger.
Important Charging Notes
Charge within temperature limits, recharge when power is low, avoid overcharging.
Safety Warnings and Instructions: Drills
Drill Operation Safety
Hold drill firmly, tighten chuck, and expect stalls to prevent injury.
Operating Instructions
Switch and Control Button Functions
Control forward/reverse rotation and lock-off using the button.
Torque Control Adjustment
Set torque by rotating the collar, with 8 positions and a drill mode.
Keyless Chuck Operation
Insert and tighten bits by rotating the chuck halves.
Drilling Best Practices
Use sharp bits, secure workpiece, apply steady pressure, and avoid stalling.
Maintenance and Lubrication
Cleaning and Repair
Clean with mild soap and damp cloth; ensure authorized service for repairs.
Accessories
Recommended Accessories
Use specified accessories for metal, masonry, and wood drilling up to designated sizes.
Need help?
Do you have a question about the CD121 and is the answer not in the manual?
Questions and answers