Throttle Lever Adjustment - Baja motorsports WD250UR Owner's Manual

THE ADJUSTMENT OF THROTTLE LEVER
Adjuster cover
Throttle lever
lock nut
Adjustment nut
To adjust the throttle lever play:
1. Remove the adjuster cover (slide back on cable).
2. Loosen the throttle lever lock nut.
3. Turn the large adjustment nut in or out to obtain the correct play.
4. Tighten the throttle lever lock nut.
5. Recheck the throttle lever free distance.
Re-adjust it if it is not within the correct limits.
WARNING
Operating the vehicle with an inadequate throttle lever free play
distance could be hazardous.
Inadequate throttle lever free distance could cause engine speed to rise
suddenly when you turn the handlebars. This can lead the rider to lose
control.
Adjust the throttle lever free distance so that engine idle speed does
not rise due to handlebar movement.
3.0~5.0mm
(0.12~0.20in)
51
Measure the throttle lever play.
3.0~5.0mm (0.12~0.20in) as shown