Vertex Standard EVX-5300 Operating Manual page 21

a o
dVancEd pEratIon
Ext acc 2
Press, (or press and hold), the assigned PF key to toggle the output port "2" of the
D-Sub 15-pin Accessory Connector "On" and "Off".
E
mErgEncy
The EVX-5300/-5400 series include an "Emergency" feature in either analog or
digital modes, which may be useful for alerting another party assistance may be re-
quired, when monitoring the same frequency as the pre-defined emergency channel.
Press and hold the assigned PF key for pre-programmed period to initiate an
emergency call on the pre-defined channel. For further details contact your Vertex
Standard dealer.
To revive the radio from the Emergency mode, just press and hold again the as-
signed PF key or turn off the radio.
In the EVX-5300 , when the Emergency feature is activated, the Transceiver Status
Indicator (" A ", " B " or " C ") will illuminate if the "Emergency" status is assigned
to one of the Transceiver Status Indicators.
In the EVX-5400 , when the Emergency feature is activated, the "- EMG -" indi-
cation will be indicated on the display.
l W
onE orKEr
Press, (or press and hold), the assigned PF key to activate the Lone Worker fea-
ture. The Lone Worker feature is designed to emit an alarm for 30 seconds when
the Lone Worker Timer (programmed by your Vertex Standard dealer) has expired.
Press again, (or press and hold again), the assigned PF key, the Lone Worker fea-
ture is disabled. If the user does not reset the timer by pressing the PTT switch, the
radio switches to Emergency mode.
In the EVX-5400 , 1) when the Lone Worker feature is activated, the " " icon will
be indicated on the display, and 2) when the Lone Worker feature is "on" and "off",
the display indicates briefly "L-WK ON" and "L-WK OFF".
g u /d
( These functions are only available in the EVX-5400 )
roup p oWn
Press, (or press and hold), the assigned PF key to select a different group of chan-
nels. A group name will appear briefly on the display.
cH u /d
p oWn
Press, (or press and hold), the assigned PF key (generally the [  ] / [  ] key) to
select a different channel. In the EVX-5400 , a channel name will appear briefly on
the display.
EVX-5300/-5400 O M 19
pErating anual