• System frequency response: 48 Hz - 20 kHz The Polk ® F/X Wireless Surround addresses all of these issues with a simple and • 2.4GHz wireless transmission elegant single in-room wireless speaker system that can easily be placed on the •...
Place the long axis of the F/X Wireless Surround loudspeaker behind the listening area. The amplifier input has arrows indicating proper left/right channel orientation. The F/X Wireless Surround can be placed either on the floor, on a table or on a shelf. Due to the unique properties of Controlled Dispersion Array, the speaker can still operate with a solid surface several feet above it, providing there is ample open area to either side of the speaker transducer array located at each end of the curved baffle.
Speaker Complement Enclosure: The 4 - 2 1/2" drivers and 5 1/4" woofer incorporate Polk Audio’s Dynamic Balance technology to minimize modal resonances for more natural midrange and low fre- The Polk Audio F/X Wireless Surround is a tri-chamber design that individually iso- quency reproduction.
Page 6
The dual speaker arrays in the F/X Wireless Surround are oriented towards side- Our new understanding of how resonance develops on speaker components led us walls and laterally radiate “narrow” beams of sound. For purposes of properly to develop a design technique called Dynamic Balance.
Page 8
5601 Metro Drive, Baltimore, MD 21215 USA Phone: 800-377-7655 Fax: 410-764-5266 www.polkaudio.com...
Need help?
Do you have a question about the F/X Wireless Surround and is the answer not in the manual?
Questions and answers