Remote Control - Omega Altise OPM15E Instruction Manual

ON / OFF Timer
Timer ON
1. Press the SET button twice. The time display will flash along with the word ON
(left of the time display).
2. While the time display is flashing press the UP and DOWN buttons to reach the
time in hours until you want the unit to start.
3. The UP button adds 1 hour per press.
4. The DOWN button adds 1 minute per press.
5. Once the time display stops flashing it will begin counting down to turning the
unit on.
6. Press the SET button twice to cancel the ON timer.
Timer OFF
7. Press the SET button 3 times. The time display will flash along with the word
OFF (left of the time display).
8. While the time display is flashing press the UP and DOWN buttons to reach the
time in hours until you want the unit to stop.
9. The UP button adds 1 hour per press.
10. The DOWN button adds 1 minute per press.
11. Once the time display stops flashing it will begin counting down to turning the
unit off.
12. When the OFF timer expires, the unit will switch off and the display will show
"88:88 END".
13. Press the SET button 3 times to cancel the OFF timer.

Remote Control

1. The remote will not turn the power on. You will need to switch
the unit on and off using the switch on the right side panel.
2. SET THE TIME: Press the " " " " on the right of the remote
(marked "TIME").
3. SET THE MODE: Press the MODE button to cycle between
LOW, HIGH, and AUTO.
4. SET THE TEMPERATURE: Press SET once. While the
display is flashing press the " " " " on the left side of the
remote (marked "TEMP"). Each press of buttons will increase
or decrease the set temperature by 1 degree accordingly.
When the display stops flashing the temperature is set.
7
omega altise