Before Operating; Getting Started; Clock Setting; Stop/Clear - Sharp Carousel R-395N Operation Manual And Cookbook

BEFORE OPERATING

Getting Started

Step
Procedure
Plug the oven into a power point and switch
on the power.
1
Ensure the oven door is closed.
Press the STOP/CLEAR pad so that the
oven beeps.
2

Clock Setting

* To enter the present time of day 11:34 (AM or PM).
Step Procedure
Press the TIMER/CLOCK pad.
1
Enter the correct time of day by pressing
the numbers in sequence.
2
Press the TIMER/CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),
display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).
If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long
as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.
Pad Order
STOP
CLEAR
Pad Order
TIMER
CLOCK
TIMER
CLOCK
6
Display
Flashing eights
Only the dots will remain.
Display
The dots (:) will flash on and
off.
will appear in the