Connecting External Equipment - Epson EB-965 User Manual

Connecting Equipment
Attention
• If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB devices should be connected to the projector directly.
• When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk.
• Connect a digital camera or hard disk to the projector using the USB cable provided with the device.
• Use a USB cable less than three meters in length. If the cable exceeds three meters, PC Free may not function correctly.
Removing USB devices
After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from
the projector.

Connecting External Equipment

You can output images and audio by connecting an external monitor or speaker.
You can also output microphone audio from the projector's speaker by connecting a microphone.
When outputting images to an external monitor
A
Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor.
When outputting audio to an external speaker
B
Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
When outputting microphone audio
C
Connect the microphone to the projector's Mic port. When using a condenser microphone, set Plug-in Power to On.
s Extended - A/V Settings - Plug-in Power
p.89
29