Problems When Projection Starts; Problems When Projection Starts; The Projector Does Not Turn On; Other Problems - Epson EB-965 User Manual

Problem Solving

Problems when Projection Starts

The projector does not turn on

Check
Did you press the [t] power button?
Are the indicators switched off?
Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this
Is the Control Panel Lock set to Full Lock?
Is remote control operation restricted?

Other Problems

No sound can be heard or the sound is faint

Check
Check that the audio/video cable is securely attached to both the
projector and audio source.
Is the volume for the projector or the connected equipment set to the
minimum?
Press the [t] power button to turn the power on.
The power cord is not connected correctly or power is not being fully supplied.
Disconnect and then reconnect the power cord.
s "From Installation to Projection" p.35
Check that your electrical outlet or power source is functioning correctly.
does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact
your local dealer or the nearest address provided in the Epson Projector Contact List.
Epson Projector Contact List
s
Press the [t] power button on the remote control. If you do not want to use Control Panel Lock, change the setting to
Off.
s Settings - Control Panel Lock p.88
Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.88
Disconnect the cable from the Audio port, and then reconnect the cable.
Adjust the volume so that sound can be heard.
s Settings - Volume p.88
s "Adjusting the Volume" p.46
Remedy
Remedy
115