Related Manuals for soundsation NEOMIX-402UFX
Summary of Contents for soundsation NEOMIX-402UFX
- Page 1 USER'S MANUAL High quality compact mixing console with FX processor and USB soundcard NEOMIX-402UFX NEOMIX-802UFX...
- Page 2 IMPORTANT SAFETY SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The symbol is used to indicate that some hazardous live terminals are involved within this apparatus, even under the normal operating conditions, which may be sufficient to constitute the risk of electric shock or death.
-
Page 3: Table Of Contents
NEOMIX-402UFX / NEOMIX-802UFX TABLE OF CONTENTS 1.INTRODUCTION..................4 1.1 General mixing console functions.........................4 1.2 The user’ s manual............................4 1.3 Before you get started..........................4 1.3.1 Shipment ............................4 1.3.2 Initial operation..........................4 2.CONTROL ELEMENTS AND CONNECTORS ..........4 2.1 Mono channels............................5 2.1.1 Microphone and line input........................5... -
Page 4: Introduction
NEOMIX-402UFX / NEOMIX-802UFX 1.INTRODUCTION 1.1 general mixing console functions Congratulations! In purchasing the NEOMIX you have acqui- A mixing console fulfils three main functions: red a mixer whose small size belies its incredible versatility and audio performance. ＊Signal processing: Preamplification, level adjustment, mixing of effects. -
Page 5: Mono Channels
NEOMIX-402UFX / NEOMIX-802UFX 2.1 Mono channels HIGH 12 kHz 2.1.1 Microphone and line inputs - 1 5 2.5 kHz - 1 5 80 Hz - 1 5 Fig. 2.2: Panorama and routing controls The upper (HI) and the lower band (LO) are shelving filters that increase or decrease all frequencies above or below their cut-off frequency. -
Page 6: Routing Switch, Sole And Channel Fader
NEOMIX-402UFX / NEOMIX-802UFX Each stereo channel has two balanced line level input on 2.1.4 Routing switch, solo and channel fader 1/4＂connectors for left and right channels. If only the connector marked ＂ L ＂ is used, the channel operates in mono. Stereo channels are designed to handle typical line level signals. -
Page 7: Aux Send Connectors 1 And 2
NEOMIX-402UFX / NEOMIX-802UFX SOLO 2.3.4 Stereo aux return You can use the SOLO switch to separately monitor the STEREO AUX RETURNS aux sends via the CONTROL ROOM/PHONES outputs and check these with the level metres. TO AU X If you want to monitor the signal of just one AUX... -
Page 8: Level Metre And Monitoring
NEOMIX-402UFX / NEOMIX-802UFX MODE 2.3.6 Level meter and monitoring The MODE switch determines whether the channels' SOLO switch operates as PFL (Pre Fader Listen) or as solo (Solo In P OWER 4 8 V Place). 2TK TO MAIN MIX C L I P 2-TRACK To activate the PFL function, depress the MODE switch. -
Page 9: Rear View Of 1204Fx/1204
NEOMIX-402UFX / NEOMIX-802UFX After the phantom power supply has been switched Use the high-precision quality faders to control the output level on, do not connect microphones to the mixer (or the of the Alt 3-4 subgroup and main mix. stagebox/wallbox). Connect the on. In addition, the monitor/PA loudspeakers should be muted before 2.4 Rear view of... -
Page 10: Digital Effects Processor
NEOMIX-402UFX / NEOMIX-802UFX 3.DIGITAL EFFECTS PROCESSOR 4.2 Cable connections You will need a larger number of cable for the various 2 4 - B I T M U L T I - F X P R O C E S S O R connections to and from the console. -
Page 11: Specifications
NEOMIX-402UFX / NEOMIX-802UFX Stereo inputs Balanced use of Type 1/4＂ TRS connector, 1/4＂T RS connector electronically balanced strain relief clamp approx. 20 k Ω Impedance sleeve hot (+ ve) ground shield Max. Input level +22 dBu sleeve ring ring EQ mono channels... -
Page 12: Warranty And Service
WARRANTY AND SERVICE All SOUNDSATION products feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. The following cases/components are not covered from the above warranty: -Any accessories supplied with the product -Improper use -Fault due to wear and tear -Any modification of the product effected by the user or a third party...