Wire Connection - Clarion NX503E Quick Start Manual & Installation Manual

9. WIRE ConnECTIon

Radio antenna jack
USB terminal
Rear Vision
GPS antenna
Camera
jack (NX503E
HDMI cable
terminal
only)
(sold separately)
Steering wheel
remote control
terminal (sold
separately)
Red
Gray
White
Red
Black
White
Red
Purple
White
Yellow
Gray
Yellow
Black
Red
Black
White
Refer to the following
page.
HDMI/MHL Android
conversion adapter smartphone
HDMI/MHL
conversion cable
or
Android
smartphone
Microphone
(sold separately)
External
Front
Amplifier
audio
Right
output
Left
terminal
Rear
audio
Right
output
Left
terminal
Subwoofer
Rear Monitor
output
Right
terminal
Left
(MONO 2ch)
®
iPod /iPhone
video output
terminal
Connection cable
(CCA-750)
video input
terminal
Right
audio input
terminal
Left
*1 In certain vehicles - Volkswagen/opel/Vauxhall - it is necessary to exchange the accessory
<<Red>> and the main power <<Yellow>> connection, to avoid overload and loss of memory.
*2 When the unit is installed in a 1998 or later Volkswagen model, make sure to interrupt the
<<Remote>> output. Disconnect the <<blue/white>> wire and insulate the front ends of this
cord. A breakdown may occur if the cord is not disconnected, or front ends are not insulated.
See next page for how to connect the parking brake lead.
No. Description
REAR RIGHT
REAR RIGHT
FRONT RIGHT
FRONT RIGHT
FRONT LEFT
FRONT LEFT
REAR LEFT
REAR LEFT
+12 V MAIN POWER (*1)
Auto antenna
ILLUMINATION
+12 V ACCESSORY (*1)
GROUND
ISO CONNECTOR
Spare terminal (Yellow)
Parking brake (Grass-green)
Remote terminal (Blue/White) (*2)
Reverse gear terminal (Purple/White)
NX503E/FX503E 15