Operational Instructions; Quick Start; Computer Instructions; Adjusting The Resistance - Inspiration Pursuit Exercise Cycle Owner's Manual

OpERATIONAL INSTRUCTIONS

Quick Start

• Simply start pedaling and way you go!
• The value of time, distance and calories will start counting upwards.
• Adjust the resistance level with the large dial control knob.

Computer Instructions

USING THE METER
POWER ON
POWER OFF
MODE BUTTON
FUNCTIONS
SCAN
TIME
SPEED
DISTANCE
CALORIES
HEART RATE
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will be kept. Push the MODE
button and hold it down for three seconds to reset all functions to zero.

Adjusting the resistance

This cycle features a speed independent braking (resistance) system. The resistance is controlled
by a magnet, which is moved closer or further away from the flywheel - the closer the magnet
is to the flywheel the higher the resistance. The magnet is controlled manually, by twisting the
knob. The resistance levels go from easy ( - ) to hard ( + ).
10
DESCRIPTION
• Pedal movement or push the MODE button.
• Automatic shut off after four minutes of inactivity.
• Press to select display functions:
SCAN / TIME / SPEED / DISTANCE / CALORIES / HEART RATE
• Press and hold for three seconds to reset all functions to zero.
DESCRIPTION
• Automatically scans each functions every 4 seconds in the following sequence:
TIME / SPEED / DISTANCE / CALORIES / HEART RATE
• To activate, press and release MODE button until SCAN appears on the display.
• Display the time for one second up to 99:59 minutes.
• Display the current speed from 0 to 999.9km per hour.
• Display the distance from 0 to 99.99km.
• Display the calories consumption from 0 to 999,9 kcal.
• The calories readout is an estimate for an average user. It should only be used as a
comparison between workouts on this unit.
Display your heart rate in beats per minute. To display heart rate, select HEART RATE mode
and grasp the pulse sensors on the handlebars, one in each hand. The heart symbol will
begin flashing when the meter senses your heart rate. Your heart rate will be displayed
approximately five seconds after the heart icon is displayed. If you do not place your hands
correctly and 60 seconds passes without a heart rate reading, the meter will turn off the heart
rate circuit. If this occurs, press the MODE button to restart, place your hands back on the
pulse sensors correctly, and the heart rate readout will appear.