IBM P96 Operating Instructions Manual page 20

Customizing Your Monitor
Adjusting the moire
If elliptical or wavy patterns appear on the screen, adjust the
moire cancellation level.
1
Press the button.
The MENU OSD appears.
2
Press the ./> buttons to select "
press the button again.
The OPTION OSD appears.
3
Press the ./> buttons to select "
4
Press the ?// buttons to adjust the amount of
moire cancellation until the moire effect is at a
minimum.
* Moire is a type of natural interference which produces soft,
wavy lines on your screen. It may appear due to interference
between the pattern of the picture on the screen and the
phosphor pitch pattern of the monitor.
Example of moire:
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset, press the ? (reset) button while the OSD is on.
12
Changing the on-screen display position
You can change the OSD position (for example, when you
want to adjust the picture behind the OSD).
1
2
OPTION" and
OPT I ON
DEGAUSS
ON
3
MOIRE* ADJUST."
OPT I ON
MO I RE
AD J US T
2 6
4
Press the
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset, press the ? (reset) button while the OSD is on.
Press the button.
The MENU OSD appears.
Press the ./> buttons to select "
press the button again.
The OPTION OSD appears.
Press the ./> buttons to select "
POSITION)" or " (OSD V POSITION)."
Select " (OSD H POSITION)" to adjust the horizontal
position.
Select " (OSD V POSITION)" to adjust the vertical
position.
Press the ?// buttons to move the OSD to the
desired position.
button once to return to the MENU OSD, and
OPTION" and
OPT I ON
DEGAUSS
ON
(OSD H
OPT I ON
OSD H
POS I T I ON
2 6
OPT I ON
OSD V
POS I T I ON
2 6