Selecting the input signal
Press to select the input signal to be played back from the equipment which has
been connected to the Display.
Input signals will change as follows:
HDMI
HDMI: HDMI input terminal in AV IN (HDMI).
PC: PC input terminal in PC IN.
DVI: DVI input terminal in DVI-D IN.
* "PC" may be displayed as "PC [YP
"Component/RGB-in select". (see page 34)
Notes:
• Selecting is also possible by pressing the INPUT button on the
unit.
• Select to match the signals from the source connected to the
PC input terminals. (see page 34)
PC*
DVI
P
B
]" depending on the setting of
R
15