Picture Adjustments - Panasonic TH-42LF5E Operating Instructions And Owner's Manual

Picture Adjustments

1
2
Select to adjust each item.
Picture
Normalise Normal
Normal
Picture Mode
Backlight 100
70
Contrast
Brightness 50
Sharpness 50
Normal
White balance
Advanced settings
Press to enter
Advanced settings .
Advanced settings
Enables ¿ ne picture adjustment at a professional
level (see next page).
Advanced settings
Normalise Normal
Input level
Gamma
AGC
W/B High R 50
50
W/B High G
W/B High B 50
50
W/B Low R
50
W/B Low G
W/B Low B 50
Helpful Hint (
While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during "Normalise", then all adjustment values are returned to the factory settings.
Press to display the Picture menu.
Press to select the menu to adjust.
Select the desired level by looking at the picture behind the menu.
Note:
Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input
and menu setting.
0
2.2
Off
/ Normalisation)
Normalise
Press " " or " " button to switch between modes.
Normal
Cinema
Normal
For viewing in standard environments.
Dynamic
For viewing in brighter environments.
Cinema
For use in viewing tone-focused pictures with
brightness reduced.
Note:
If you would like to change the picture and colour
of the selected Picture menu to something else,
adjust using the items in the Picture menu. (see
next page)
Press " " or " " button to switch between modes.
Normal
Dynamic
Warm Cool
23