KaiCong SIP1201 User Manual page 31

KaiCong-Nothing important than safety！
as you set in figure 2）
After finishing the port forwarding, you can use WAN IP address of router and http
port of camera to visit the camera by remote computer as figure 6.
Notice: because the routers are different, so the interface and setting method of
router are also different, how to do the port forwarding for various routers, please
refer to the user manual of your router or consult with router manufacturer.
Visiting device by other software
Other web browser
In the Windows OS, for using browser with IE kernel, user must download the ActiveX.
While for Safari and Firefox browsers, please Download "QuickTime" plug-in and
install it to access the IP camera. After installation, please run the QuickTime
program to access the QuickTime Preferences dialog box from Edit Menu, example as
figure 31. Click "Advanced", select "custom." in the Transport Setup. It pops
up the Streaming Transport dialog box. Please select "HTTP" for transport protocol
and "80" as port ID, click "ok", and then return to Transport Setup to change
"Custom" to "Auto". Finally, click "ok" at the bottom. After finishing these
settings, run the Firefox or Safari browser to view the video.
Figure 31
In Mac computer, the Quick time is installed by default, so the user simply accesses
setting tool folder at application folder and run the command program, enter command
Anything else ,please contanct me.