Onvif Setting - KaiCong SIP1201 User Manual

Remote visit setting
In chapter 2.3, you have known how to do port forwarding. After the success of the
Dst port setting, you can also visit camera by DDNS. The manufacturer has established
a DDNS system, and allotted a DDNS to every device, the user can view it from remote
PC, example of figure 14.
User can also use third party DDNS, such as
name from this website and fills the info into below blanks (Figure 15) and saves
the settings. Then the domain name can be used.
Notice: Using the third party DDNS, if the http port is not 80, the port number should
be added to the domain name with colon.
Example: http://mydomain.dyndns.org:81.

ONVIF setting

The camera supports ONVIF protocol, so it can be interconnected with other factory
camera with ONVIF.
Anything else ,please contanct me.
KaiCong-Nothing important than safety！
Figure 14
www.dyndns.com.
Figure 15
Figure 16
User applies a free domain