Controls And Indicators - IBM IntelliStation Z Pro 6221 Installation Manual

Controls and indicators

Ethernet
transmit/receive
activity LED
CD-eject button
CD-ROM drive activity LED
Diskette drive activity LED
Diskette-eject button
Ethernet link status LED
Ethernet transmit/receive activity LED
Hard disk drive activity LED
IEEE 1394 (FireWire) connector (some models)
6
IBM IntelliStation Z Pro Type 6221: Installation Guide
Ethernet link status LED
Press this button to release a CD from the CD-ROM drive.
When this LED is lit, it indicates that the CD-ROM drive is in use.
When this LED is lit, it indicates that the diskette drive is in use.
Press this button to release a diskette from the diskette drive.
This LED is on the Ethernet connector on the back of the computer. When
this LED is lit, it indicates that there is an active connection on the Ethernet
port.
When this LED is lit, it indicates that there is activity between the computer
and the network. There are two Ethernet transmit/receive activity LEDs: one
on the front bezel and the other on the Ethernet connector on the rear of
the computer.
When this LED is flashing, it indicates that a hard disk drive is in use.
This connector is used to connect IEEE 1394 devices to your computer.
CD-ROM drive
activity LED
CD-eject
button
Diskette drive
activity LED
Diskette-eject
button
Hard disk drive
activity LED
Power-on
LED
94
13
Power-control
button
Ethernet transmit/
receive activity LED
System error LED
IEEE 1394 (FireWire) connector
Microphone connector
Line out connector
USB port A connector
USB port B connector
1394