Table of Contents
Advertisement
6.5
AP Bridge - Point to Multipoint Mode
This function allows WRT-414 to bridge more than 2 wired Ethernet networks together by
wireless connection.
Parameter
Description
Mode
Shows the current operation mode. You may set WRT-414 to other operating mode
by select other operating mode.
Band
2.4GHz (B): It allows to select the transmit rate up to 11Mbps.
2.4GHz (G): It allows to select the transmit rate up to 54Mbps.
2.4GHz (B+G): It allows selecting the 802.11b and 802.11g data rates.
Channel Number
Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
AP MAC Address
If you want to bridge multiple WRT-414 in this mode, you have to enter the MAC
addresses of other WRT-414 into the fields.
Set Security
IF you want to enable security to protect your wireless connection. Please press
"Set Security" button and refer to section 6.7 "Security setting for bridge mode" to
- 65 -
Advertisement
Table of Contents
