Analogue Tv Menu System; Picture Menu - TECHWOOD 2443144 Operating Instructions Manual

Colour television with remote control

Hide thumbs

Table Of Contents

Table of Contents

Select your Country , Language and Text language

by using " " or " " and " " or " " buttons. Press

"OK" or RED button to continue. To cancel, press

BLUE button. The following menu will be displayed

during the automatic tuning:

After APS is ﬁ nalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

Manual Channel Scan

In manual channel scan, the number of the multiplex is

entered manually and only that multiplex is searched

for the channels. For each valid channel number, signal

level and signal quality are shown on the screen.

In both manual and auto search any existing channel

in the database is not re-stored to avoid redundant

duplicates of that channel.

First Time Installation

The user can use this item to load default settings,

which were loaded to the receiver at the factory.

To install factory settings, highlight "First Time

Installation" menu item and press "OK" button,

then you will be asked whether or not to delete the

settings. Selecting "Yes" by pressing "OK" button

while the "Yes" is highlighted will delete the existing

channel table.

Then you will be asked to conﬁ rm for deleting all

channels and settings:

By selecting Yes and pressing the "OK" button, the

existing channel table will be deleted. After factory

IF YOU NEED ANY ASSISTANCE OR A CUSTOMER REFERENCE NUMBER PLEASE CONTACT THE

01_MB45M_[GB]_3902UK_IDTV_BRONZE14_26884W_10073456_50191025.indd 18

settings are loaded, "First Time Installation" menu

will be displayed.

The menu which is displayed for language selection

appears on the screen at ﬁ rst. By using " " or " "

buttons, select the desired language option, and press

OK button to activate.

After then, "First time installation" OSD will appear

on the screen. By pressing " " or " " buttons, select

the Country you want to set and press "OK" button

(* only for EU countries).

Press the "OK" button to start installation. After search

is completed for digital channels, a message asking

whether to search for analogue channels appears

on the screen.This process is same as described in

Automatic Search section. .