Basic Operations; Operation With The Buttons Of The Tv; Operation With The Remote Control; Initial Settings - TECHWOOD 2443144 Operating Instructions Manual

Basic Operations

You can operate your TV using both the
remote control and onset buttons.

Operation with the Buttons of the TV

Main menu OSD cannot be displayed via control
buttons. "+/-" buttons will function as volume up/down
as default. Even if you set other functions for these
buttons, "+/-" buttons will perform as default after a
short while.
Volume Setting
• Press "+/-" buttons to increase or decrease volume,
so a volume level scale (slider) will be displayed
on the screen.
Programme Selection
• Press P/V/AV button once and then use "+/-" buttons
to select the next or previous programme.
AV Mode
• Hold the "P/V/AV" button, source OSD will be
displayed.
• Use "+/-" buttons to select the desired source.

Operation with the Remote Control

• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press "V+" button to increase the volume. Press
"V-" button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press " P - " button to select the previous
programme.
• Press " P + " button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to
select programmes between 0 and 9. The TV
will switch to the selected programme. To select
programmes between 10-500 (for IDTV) or 10-
199 (for analogue), press the numeric buttons
consecutively
• Press directly the programme number to reselect
single digit programmes
IF YOU NEED ANY ASSISTANCE OR A CUSTOMER REFERENCE NUMBER PLEASE CONTACT THE
01_MB45M_[GB]_3902UK_IDTV_BRONZE14_26884W_10073456_50191025.indd 10 01_MB45M_[GB]_3902UK_IDTV_BRONZE14_26884W_10073456_50191025.indd 10

Initial Settings

When the TV is turned on for the fi rst time, the
menu for the language selection appears on the
screen. The message "Welcome please select
your language!" is displayed in all language options
sequentially in the OSD.
By pressing the " " or " " buttons highlight the
language you want to set and press OK button. After
then, "First time installation" OSD will appear on the
screen. By pressing " " or " " buttons, select the
country you want to set and press OK button (* for
EU countries).
Note: Country selection OSD will not be available for UK.
Press OK button on the remote control to continue and the
following message will be displayed on the screen:
• To select the "Yes" or "No" option, highlight the item by
using " " or " " buttons and press the "OK" button.
The IDTV will automatically tune to the UHF or VHF(*)
(* for EU countries) transmission channels, searching
for digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take about
a few minutes.
After Automatic Search is completed, the following
message asking for analogue channel search appears
on the screen:
To search for analogue channels, select "Yes". TV
switches to the analogue TV mode. The menu is
displayed to search for analogue channels.
English - 10 -
TECHWOOD HELP LINE ON 0845 543 0485
11.05.2011 17:29:32 11.05.2011 17:29:32