Table of Contents
Advertisement
Cleaning the
automatic
document feeder
Feed rollers
The scanner parts can become contaminated with ink, toner particles,
or paper coatings. Clean the scanner feed rollers if documents do not
feed smoothly or easily, or if several documents feed at one time.
1
Turn off and disconnect the power to the scanner.
2
Open the automatic document feeder.
3
Wet a clean, lint-free cloth or cotton swab with water.
4
Wipe the feed rollers by moving the swab from side to side.
5
Rotate the roller forward with your finger and repeat step 4 until
the entire roller is cleaned.
6
Close the automatic document feeder.
7
Reconnect the power and turn the scanner back on.
Maintain your scanner
44
Advertisement
Table of Contents
