IBM Infoprint M22 MFP Setup Manual page 11

Note:
Be sure to set up the
items in the order listed in
the table.
Attaching the
caster base to the
2000-sheet drawer
5
Place power adapter bracket (1) aside for later use. The other
power adapter bracket is not used with this scanner and can be
discarded.
Use the following table to locate the instructions you need to set up
your printer and the paper handling options you purchased.
Topic
Attaching the caster base to the 2000-sheet drawer
Assembling the caster base for the 500 or 250-sheet
drawer
Installing the duplex unit
Positioning the printer
1
Remove and inventory all items from the 2000-sheet drawer
carton.
• 2000-sheet drawer
• Decals
• 16 AWG power cord
• Jumper cord
2
Place the decals, 16 AWG power cord, and jumper cord aside
for later use.
3
Remove the two screws inside the 2000-sheet drawer pockets.
Use a number 2 Phillips screwdriver to remove the screws and
install the caster base.
If you have difficulty lifting the screws from the pockets, you can
wait until the next step when you turn the drawer over, then the
screws should fall out.
Assemble paper handling options
5
Go to page...
5
8
11
12