Table of Contents
Advertisement
Using your
browser
Note:
Many of these
settings depend on the
printer, options, and scanner
combination you have.
Using MarkVision
Professional
Note:
Instructions for
installing MarkVision
Professional are in the CD
booklet shipped with the
drivers CD.
1
Type the IP address of the MFP in the URL field of your
browser (for example, http://192.168.236.24), and then press
Enter.
2
Click Configuration.
3
Select Copy Setup from the MFP menu.
The Copy Setup page has the following menu items available:
• Content
• Paper Saver
• Duplex
• Original Size
• Scaling
• Output Bin
• Factory Defaults
4
Select the menu item for the setting you want to change.
5
Select the new setting and click Submit.
6
Repeat steps 1 through 5 to change additional settings.
MarkVision Professional is a printer management utility on the
drivers CD.
After installing MarkVision Professional, you can do an IP search to
find the MFP containing the print server and go to the Copy tab to set
the required information. Click Configure
TCP/IP address manager.
Follow the instructions on the screen, and then save your settings
before closing MarkVision Professional.
Change your default copy settings
31
• Copy Media
• N-up frame
• Finishing
• Copy Size
• Default Darkness
• Number of Copies
• Copy Quality
TCP/IP, and launch the
Advertisement
Table of Contents
