Ec Declaration Of Conformity - Husqvarna 327P4 Series Operator's Manual

Guide bar and saw chain combinations
The following combinations are CE approved.
Guide bar
Length, inch
10
12
D
_
D
PITCH =
2
H37
Approved accessories
Saw attachment with shaft PA 110
EC Declaration of Conformity (Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the pruning
saws Husqvarna 327P4 and 327P5 dating from 2014 serial numbers and onwards (the year is clearly stated on the
rating plate, followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
The following standards have been applied:
EN ISO 12100:2010, CISPR 12:2005, EN ISO 11680-1:2011, EN ISO 14982:2009
0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC type examination
in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate for EC type examination
in accordance with annex IV, has the number: 0404/09/2201
Huskvarna 19 may 2014
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
TECHNICAL DATA
Pitch, inch
3/8
3/8
80
Saw chain
Husqvarna H37
Husqvarna H37
Art No.
537 18 33-13
5796536-01
Use with
327P5
English – 29