Audio Inputs & Subwoofer Output; Using The Stereo Rca Inputs; Using The Optical Input; Using The Subwoofer Output - iLive ITB382B User Manual

Audio Inputs & Subwoofer Output

Using the Stereo RCA Inputs

When connecting two products using an RCA
Cable, match the colored ports with the same
colored connection.
Before use, disconnect any cables connected to the
Line In.
1. Connect the RCA Cable to the RCA Stereo Inputs
located on the back of the unit, and to the audio
outputs on the television.
2. Press the Power button to power on the unit.
3. Press the Source button repeatedly to enter
Aux/Line Mode, indicated by a white light.
4. Audio played through the television will now be
heard through the speakers.

Using the Optical Input

You will need: An audio source with an Optical
Audio Output and a Digital Optical Audio Cable
(not included)
1. Connect the Digital Optical Audio Cable to the
optical output on the audio source and to the
Optical Input on the speaker bar.
2. Press the Power button to power the unit on.
3. Press the Source button repeatedly to switch to
SPDIF Mode, indicated by an amber light.
4. Using the native controls on your connected
device, make sure the audio settings are set to
PCM or Optical Audio and are turned On.
5. Audio from the connected audio source will now
be played through the speakers.

Using the Subwoofer Output

1. Use an RCA cable (included) to connect an
external subwoofer to the Subwoofer Output.
2. When audio is played through any source, the
bar speaker will automatically use the connected
subwoofer.
8
18V
18V