Item
Enable Static Route
IP Address
Subnet Mask
Gateway
Metric
Interface
5.6.11 VPN Passthough
Virtual Private Networking (VP N) is typically used for work-related net working. For VP N tunnels,
the router supports IPSec, Pass-through, PPTP Pass-through, and L2TP Pass-through.
Item
IPSec Pass-through
PPTP Pass-through
L2TP Pass-through
IPV6 Pass-through
http://www.sapido.com.tw/
Description
Enable or Disable dy namic route
Destination IP address
Destination IP subnet mask
Gateway IP address for destination
Metric number on router's routing table
Static route rule for LA N or WAN interface
Description
Internet Protocol Security (IPSec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. To allow
IPSec tunnels to pass through the router, IPSec Pass-through
enabled by default. To disable IPSec Pass-through , select Disable
Point-to-P oint Tunneling Protocol is the method used to enable
VPN sessions to a Windows NT 4.0 or 2000 server. To allow PPTP
tunnels to pass through the router, PPTP Pass-through is enabled
by default. To disable PP TP Pass-through, select Disable.
To allow the L2TP net work traffic to be forwarded to its destination
without the network address translation tasks.
Allow IPV 6 packet to be forwarded to its destination without the
network address translation tasks.
74
is
User Manual v1. 0.0