Port Filtering - Sagido BRF70n User Manual

Manual Uplink speed
Automatic downlink
speed
Manual Downlink speed
Addre ss Type
Local IP Address
MAC Addre ss
Mode
Uplink Bandwidth
Downlink Bandwidth

5.5.3 Port Filtering

When enabled packets are denied access to Internet/filtered based on their port address.
Item
Enable Port Filtering
Port Range
Protocol
Add
Current Filter Table
Delete Selected & Delete
All
Port 80 has been blocked as the following illustrate.
http://www.sapido.com.tw/
Input uplink bandwidth manually
Check the Automatic downlink speed.
Input downlink bandwidt h manually
Set QoS by IP Address or MAC address
Set local IP Address if the address type is by IP Address
Set MAC Address if the address type is by MAC Address
Select Guaranteed minimum bandwidth or Restricted maximum
bandwidth
Key in the bandwidth.
Key in the bandwidth.
Description
Select Enable Port Filtering to filter ports.
Enter the port number that needs to be filtered.
Please select the protocol type of the port.
Click on Add to save the setting data.
It will display all ports that are filt ering now.
Click Delete Selected will delete the selected item. Click Delete All
will delet e all items in this table.
66
User Manual v1. 0.0