Router_B LAN PC will get IP address from Router_A.
If you failed the WDS setting, please check you setting with refer to the list below.
Wireless Mode
LAN IP Address
Security
DHCP
Note 1: LA N IP address should be under the same segment but cannot be the same number.
5.4.7
Schedule
Please refer
Wireless Schedule
5.5
NAT
Please refer
NAT Management
http://www.sapido.com.tw/
Router_A
AP+WDS
Set the same segment as the
router B(Note 1)
Example :192.168.1.1
Set the same security as
Rout er_B
Enable
64
Router_B
WDS
Set the same segment as the
router_A (Note 1)
Example :192.168.1.2
Set the same security as
Rout er_A
Disable
User Manual v1. 0.0