The Product Does Not Work Properly - Sony DSC-RX100M3 User Giude

Set the date and time again.
The internal rechargeable backup battery has discharged. Insert a charged battery, and set aside for
24 hours or more with the power left off.
[292] Troubleshooting
The number of recordable images does not decrease, or
decreases two images at a time.
This is because the compression rate and the image size after compression change depending on the
image when you shoot a JPEG image.
[293] Troubleshooting

The product does not work properly.

Turn off the product. Remove the battery pack and insert it again. If the product is hot, remove the
battery pack, and allow it to cool down before trying this corrective procedure.
If an AC-UD10/AC-UD11 AC Adaptor (sold separately) is used, disconnect the power cord. Connect
the power cord and turn on the product again. If the product repeats the same error often or still does
not work after trying these solutions, consult your Sony dealer or local authorized Sony service facility.
[294] Troubleshooting
"--E-" appears on the screen.
Remove the memory card, and insert it again. If the problem persists even after performing this
procedure, format the memory card.
[295] Troubleshooting
Self-diagnosis display
If a code starting with a letter of the alphabet appears, the self-diagnosis function on this product is
working. The last two digits (indicated by □□) will differ depending on the state of this product.
Troubleshooting
Troubleshooting
Troubleshooting
Messages Messages
Others
Others
Others