Harbor Freight Tools 46310 Assembly And Operating Instructions

Table stand for use with 10” tile saw, sku #95385

Download this manual

FOR USE WITH 10" TILE SAW, SKU #95385

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

TABLE STA N D

3491 Mission Oaks Blvd., Camarillo, CA 93011

REV 01/07

4 6 3 1 0

Note: Tile Saw shown is

not included with this

product, but is available for

purchase through Harbor

Freight Tools.

Page 1 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2001 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Page 2: Specifications
Use of any other parts will void the warranty. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. Warning: The warnings, cautions, and instructions discussed in this instruc- tion manual cannot cover all possible conditions and situations that may oc- cur.
Page 3 Unpacking When unpacking, check to make all parts listed on Page 4 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Assembly Attach the two Wheel/Brake Assemblies [2] to the Rear Saw Stand [1-2] as shown in the Assembly Diagram on Page 4.
Page 4: Assembly Drawing
(w/4 bits, washers and nuts each) Stand Knobs Saw Frame Assembly (not included) Assembly Drawing NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 46310 Page 4 REV 01/07...