Table of Contents
Advertisement
Multi-purpose Workbench
Distributed exclusively by harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sAVe this MAnuAl.
©
Copyright
2008 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
With lighting
AsseMbly instructions
Tools sold separately.
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
99681
®
.
Manual revised 08l
Advertisement
Table of Contents
Related Manuals for Harbor Freight Tools 99681
Summary of Contents for Harbor Freight Tools 99681
-
Page 1: Assembly Instructions
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. -
Page 2: Important Safety Information
Always wear Ansi-approved minor or moderate injury. SKU 99681 For technical questions, please call 1-800-444-3353. Page 2... -
Page 3: Grounded Tools: Tools With Three Prong Plugs
The plug and outlet should look like those in the preceding illustration. (see 3-prong plug and outlet.) SKU 99681 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Double Insulated Tools: Tools With Two Prong Plugs
Using exten- sion cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and pos- sible tool damage. (see table A.) SKU 99681 For technical questions, please call 1-800-444-3353. Page 4... - Page 5 150% of the rated amperes. symbology Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions per Minute n 0 xxxx/min. (RPM) SKU 99681 For technical questions, please call 1-800-444-3353. Page 5...
-
Page 6: Specifications
Fig. 2 note: With the two Rear Posts laying on the floor, the sides with ten holes (2L & 1L, 2R & 1R) should be facing the floor. SKU 99681 For technical questions, please call 1-800-444-3353. Page 6... - Page 7 Mount with Glide Rail 13 Center Front “L” Bracket 11 Center Front “L” Bracket 11 Fig. 5 Stand the frame upright. Fit the Cen- ter Front “L” Bracket (11) inside the SKU 99681 For technical questions, please call 1-800-444-3353. Page 7...
- Page 8 Fig 8 14. Place the Top Shelf (18), Bench Top (19), Drawer Boards (20), and Bottom Board (21) into position. Attach the Top Shelf (18) using Wood Screws (28). SKU 99681 For technical questions, please call 1-800-444-3353. Page 8...
- Page 9 (32), as shown above. 17. Insert the ends of the Bolts (30) through the holes underneath the Top Shelf (18) and secure in place with the Slider Nuts (31) from the top. SKU 99681 For technical questions, please call 1-800-444-3353. Page 9...
- Page 10 90º, rolling in a forward or back- ward direction and dropping the bulb straight down. With the prongs on either end of the bulb vertically aligned, fit the new SKU 99681 For technical questions, please call 1-800-444-3353. Page 10...
-
Page 11: Please Read The Following Carefully
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 99681 For technical questions, please call 1-800-444-3353. Page 11... -
Page 12: Assembly Diagram
AsseMbly DiAgrAM SKU 99681 For technical questions, please call 1-800-444-3353. Page 12...