Chamberlain LA100 Owner's Manual page 16

Residential gate operator

Hide thumbs Also See for LA100:

Table of Contents

REMOVE THE OPERATOR AND MARK MOUNTING HOLES FOR DRILLING

Ensure gate operator is level by placing level under the gate operator. Remove gate operator

from brackets by removing the hair clips. Mark holes to be drilled. For the post bracket, mark

and drill holes in the middle of the slots to allow for minor adjustments if required. Remove

brackets and drill holes.

SECURE POST BRACKET TO GATE POST

HARDWARE

NOT PROVIDED

Flat Washers

Hex Nuts

Lock Washers

SECURE GATE BRACKET TO GATE

Mount gate bracket with appropriate hardware (not provided). If your gate is constructed of round tubular

framing, u-bolts can be used lieu of through bolt hardware.

NOTE: The gate bracket can be secured to the gate using a welder.

NOTE: Release lever must point toward the hinge post.

Installation

Carriage Bolts

Gate Bracket

1/2" holes required

for mounting

hardware provided.

NOTE: Some installations may require reinforcement of

existing gate structures for suitable support.

Reinforcement Area

Welder (Optional)

Table of Contents