Marking The Video While Recording; Slow-Motion (High-Speed) Recording - JVC Everio GZ-EZ555 User Manual

Recording

Marking the Video While Recording

You can mark a specific scene while recording video. When a mark is made,
the marked position is recorded to make it easy to find the position and start
a digest playback.
The mark function can be used only for videos recorded in AVCHD format.
0
(Videos recorded in iFrame format is not supported.)
1
Open the LCD monitor.
2
Start recording a video.
Press the START/STOP button again to stop recording.
0
3
Tap the mark icon D at the scene you want to mark.
Once a scene is marked, the next mark won't be made within 5
0
seconds.
4
End recording a video.
Tap 7 to end the video recording.
0
Memo :
Refer to the below for playing back the marked scenes.
0
" MARKING PLAYBACK " (A p. 70)
"Using the Markings" (A p. 162)
56

Slow-motion (High-speed) Recording

You can record videos in slow-motion by increasing the recording speed to
emphasize the movements, and play back the slow-motion video smoothly.
This is a handy function for checking movements, such as golf swings.
Recording Speed
Image size
Maximum Recording Time
Maximum Playback Time
Image Size when Connected to Monitor
The playback time will be 5 times of the actual recorded time.
0
(Example: If the recorded time is 1 minute, the playback time will be 5
minutes.)
*The following is a screen of the model with Wi-Fi functions.
1
Open the LCD monitor.
Check if the recording mode is A.
0
If the mode is B still image, tap B on the recording screen to display
0
the mode switching screen.
Tap A to switch the mode to video.
2
Tap "MENU".
The top menu appears.
0
3
Tap "SPECIAL RECORDING".
300 fps
720×480
144 m
12 h
1920×1080